Add SNMP Monitor (such as switches)
Back
*
IP
*
SNMP Port
*
SNMP Version
version1
version2c
version3
*
SNMP Community
Upstream Traffic OID
(OID is generally 1.3.6.1.2.1.2.2.1.16. X, where X is generally interface #. Please fill in multiple lines. If you fill in 1.3.6.1.2.1.2.2.1.16, the system will automatically obtain all interface traffic by default)
Downstream Traffic OID
(OID is generally 1.3.6.1.2.1.2.2.1.10. X, where X is generally interface #, please fill in multiple lines. If you fill in 1.3.6.1.2.1.2.2.1.10, the system will automatically obtain all interface traffic by default)
System Desc OID
(Generally, it is 1.3.6.1.2.1.1.1.1.0, and the OID of the device name can also be filled in)
Disk occupancy OID
(You can only fill in the disk usage OID. It is also supported to fill in expressions to calculate disk usage, such as: 100- [1.3.6.1.4.1.2011.5.25.31.1.1.13.1.3], and the OID in the expression should be enclosed in square brackets.)
CPU usage OID
(You can only fill in the CPU usage OID. It also supports filling in expressions to calculate CPU usage, such as: 100- [1.3.6.1.4.1.9.2.156.0], and the OID in the expression should be enclosed in square brackets.)
Memory usage OID
(You can only fill in the memory usage OID. It also supports filling in expressions to calculate CPU usage, such as [1.3.6.1.4.1.9.9.48.1.1.1.6]/[1.3.6.1.4.1.9.9.48.1.1.1.5] * 100. The OID in the expression should be enclosed in square brackets.)
Equipment operating temperature OID
Interface Status OID
(Generally 1.3.6.1.2.1.2.2.1.8)
Equipment operating voltage OID
Voltage Unit
Remark
*
Warn Level
*
Monitor Status
Test OID Result
×
SNMPGET
SNMPWALK